Crimping Tools

Pro Tackle 254B

Light to medium duty tool designed for use with Pro Tackle copper mini and aluminum mini sleeves. Side cutters will cut monofilament and cable to 1/8" diameter Order Description: 
254B Crimping Tool

Model 116 Crimping Tool

Designed for use with 2.3mm copper double and 2.3mm aluminum oval sleeves only. Swaging pressure is applied with one hand. 8" in length, Thick vinyl handle grips. Plated to resist rust Order Description:
Model 116 Crimping Tool

Pro Tackle 450H Crimping Tool
 Heavy duty commercial grade tool with pre-set tension. Designed for everyday use. 14" in length. Crimps both copper and aluminum sleeves for 1.3mm to 4.2mm Order Description:
450H Crimping Tool 

Model 792H Crimping Tool

Heavy duty 19" commercial grade tool crimps copper and aluminum sleeves from 1.6mm to 5.2mm. Will crimp Roberds thick wall sleeves. Order Description:
792H Crimping Tool 

Model 450B Bench Crimping Tool

14" Commercial grade tool. Crimps Aluminum and copper sleeves from 1.3mm to 4.2mm. Pre-set tension, adjustable, double action. Made in the USA Order Description: 
450 Bench Tool 

Model 792B Bench Crimping Tool
19" commercial grade tool. Crimps aluminum and copper sleeves from 1.6mm to 5.6mm. Will crimp Roberds thick wall sleeves. Pre-set tension, adjustable, double action. Made in the USA Order Description:
792 Bench Tool

Model CT1000 Bench Crimper

Precision single die crimping tool with replaceable dies. Dies are easily replaced with the proper die for the monofilament being used. Tool comes complete with one die of your choice Order Description:
CT1000 Bench Crimper With Die
(Please Include Die Size)

Model 600 Bench Crimper

Precision single die crimping tool with replaceable dies. Dies are easily replaced with the proper die for the monofilament being used. Tool comes complete with one die of your choice Order Description:
Model 600 Bench Crimper with Die 
(Please Include Die Size)

Replacement Dies for above tools

Fits both the Model CT1000 tool and the Jap Bench Tool.
F  =   1.7mm
E  =   2.0mm
D  =   2.3mm
C  =   2.6mm
B  =   2.8mm 		Order Description:
Die Set for Bench Crimper
(Please Include Size)

Model 1023 Bench Tool

14" bench mount tool similar to the 450B tool but with a double jaw designed to crimp longer aluminum sleeves. Multiple dies include 1.7mm, 2.0mm, 2.3mm and 2.8mm . Made in the USA Order Description: 
Model 1023 Bench Crimper

Ordering Note:  When ordering, please use the Order Description found in GREEN Letters.  If additional help is required or to place an order  please contact our sales staff by using the contact information found at the bottom of this page. Thank you.

Last updated: 23 October, 2007