Stainless Steel Pot Haulers (Electric)
|
 |
All stainless steel construction. 12" Pinch
sheaves. Stainless steel splitter knife and back plate. Power is supplied by
either a 3/4HP or 1HP Scott motor (12VDC) with your choice of gear reduction
boxes. See Chart to the Right. |
| Motor Size |
Reduction |
Line Speed. (No Load) ft. |
Dead Lift
lbs. |
| 3/4 HP |
20:1 |
271-451 |
45-75 |
| 3/4 HP |
30:1 |
181-301 |
64-106 |
| 3/4 HP |
40:1 |
135-226 |
81-135 |
| 3/4 HP |
50:1 |
108-181 |
97-161 |
| 3/4 HP |
60:1 |
90-150 |
102-170 |
| 1 HP |
15:1 |
188-314 |
90-150 |
| 1 HP |
20:1 |
141-236 |
115-191 |
Order Description:
Stainless Pot Hauler Vertical Mount |
Stainless Steel Pot Haulers (Hydraulic)
|
|
Side
View |
Direct drive hydraulic model equipped with a
White hydraulic motor. Maximum line pull and line speed is determined by
supply and pressure. |
Order Description:
Hydraulic Pot Hauler |
Sidewinder Pot Hauler
|
|
 |
Features 10" heavy gauge stainless steel pinch
sheaves mounted on a stainless hub. Aluminum housing. Reversible stainless
splitter. Powered by a 3/4HP or 1 HP Scott motor. Available with your choice
of gear reduction boxes. The unit is pre-wired with a push-pull switch and
solenoid. The "Sidewinders" aluminum cowling has reinforced flanges
for easy mounting to your boats washboard and positions the pinch sheaves at
18 degrees to eliminated shimming problems. See to the chart to the right
for specifications. |
| Motor Size |
Reduction |
Line Speed (no load) ft. |
Dead Lift.
lbs. |
| 3/4 HP |
20:1 |
270-383 |
52-74 |
| 3/4 HP |
30:1 |
181-256 |
75-106 |
| 3/4 HP |
40:1 |
135-192 |
95-135 |
| 3/4 HP |
50:1 |
108-154 |
114-161 |
| 3/4 HP |
60:1 |
90-128 |
120-170 |
Order Description:
Sidewinder Pot Hauler (Please specify motor and gear
reduction) |
Stainless Davit Assembly for Pot Haulers
|
Hauler and block not included. |
Stainless steel boom and mounting for stainless
steel pot haulers shown above. Custom built with mounting hardware for pot
hauler and boat. Includes bottom and side mount. |
Order Description:
Stainless steel davit assembly for pot hauler.
(Block) 4" Custom Open Block with U Groove |
Crab Trap Floats
|
 |
Polystyrene floats. White in color. Solid rope
guide will accept up to 1/2" rope. Available in the following sizes.
| Size |
|
| 6" |
50 pieces per bag |
| 7 1/2" |
25 pieces per bag |
|
Order Description:
Crab Floats (Please specify size) |
Dolphin Floats (Half Floats)
|
 |
7.5" float cut in half. Halve floats used on
traps to help right the trap after being molested by marine animals. |
50 floats per bag.
Order Description:
7 1/2" Halve Floats. |
Plastic Trap Clips
|
 |
For use with 3/16" bungee for securing trap
doors. Sold by the piece. |
Order Description:
Plastic Trap Clip |
Hog Rings
|
|
 |
Sold by the pound. 30 lbs. per case. Available
in the following sizes.
3/8" Galvanized Blunt Point
3/8" Galvanized Sharp Point
1/2" Galvanized Sharp Point
7/8" Galvanized Blunt Point
1" Galvanized Blunt Point
3/8" Stainless Sharp Point
1/2" Stainless Sharp Point
1 1/4" Stainless Blunt Point |
Order Description:
Galvanized or Stainless Hog Rigs. (Please specify
size) |
Model XX Pliers
|
|
Steel Hog Ring pliers with red plastic coated
handles. Ideal for 1/2" stainless or galvanized hog rings, but with also
close 3/8" hog rings. Spring loaded handles. |
Order Description:
Model XX Hog Ring Pliers |
Model SCXX Pliers
|
|
 |
Steel Hog Ring pliers with black plastic
handles. Ideal for 3/8" hog rings and will close 1/2" hog rings. Also used
for closing open-eye hooks such as Mustad 34091.
Spring loaded handles. |
Order Description:
Model SCXX Hog Ring Pliers |
Model XXL Slant Nose Pliers
|
|
 |
Same plier as the Model XX but with a bent nose
for unique applications. |
Order Description:
Model XXL Hog Ring Pliers. |
Model L Pliers
|
|
 |
Fits larger hog rings. Rubber band on handle
applies pressure to hog rings. |
Order Description:
Model L Hog Ring Pliers |
Stainless Crab Tongs
|
 |
Stainless steel crab tongs. Stainless steel
rivet. |
Order Description:
Kasper Tongs |
Steel Crab Tongs
|
 |
Baked black enamel over steel. Five finger tong.
Poly bagged with header for retail sale. |
Order Description:
Model 195 Crab Tongs. |
Peeles 12 oz. Crab Trap Zincs
|
 |
12 oz. pot zincs with wire attachments. |
100 pieces per box.
Sold by the box or the piece.
Order Description:
12 oz. Peeles Crab Trap Zincs |
